Originally Posted by twobob
You should check the link it´s pretty easy
git clone git://github.com/dpavlin/k3libre.git
(if you dont have it sudo apt-get install git
) then repeat the last step
twobob@dev ~/GIT $ ls
now nano ~/GIT/k3libre/pdf2fb.sh
and edit the line
./pgm2fb.pl page-$page.pgm | nc 192.168.x.xxx 8888 || true
putting your kindles IP where the X´s are.
and do the same for ~/GIT/k3libre/ssh-screenshot.sh
and edit the lines
landscape=`ssh firstname.lastname@example.org cat /sys/module/eink_fb_hal_broads/parameters/bs_orientation`
and ssh email@example.com dd if=/dev/fb0 > $name.fb
with the same info.
Couple of caveats,
You will need the access via SSH working to the kindle.
You will need to know the kindles IP in advance, a fixed one in the router is not a bad idea.
This is from memory, I´ll go check my facts.
Hope this helps someone.
I edited my /etc/hosts to simply contain 192.168.x.xx k
(this is actually what the OP has set up on the dev box) this is also helpful and you can replace all the ugly IPś with k
One more point. A link to the script is also handy I made one called kss
for kindle screenshot.
Looking through the stuff in the REPO you can trigger this via launchpad amongst other functions but this should get you going.
But , assuming it can be easy , could you just share some screenshot taken from that way ? I´d love to see what it could add im terms of quality !
Good job !