Replacing Aluratek Libre Pro Screen Backing?
i got the aluratek libre pro second hand from ebay for £20 just to see what it is like and do not like the dark green backing used for the LCD display as it results in poor contrast with the black letters.
i was wandering if i should dismantle it and replace the hideous green backing with a sheet of white paper cut to the right size as this would improve contrast as a black on white is much better contrast then black on dark green contrast.
i have seen various gadgets like gimmicky clocks with LCD screens which have no backing and are transparent see through so i was wandering if i should take this reader apart and replace the lcd backing with white cardboard or paper to improve contrast.
i have taken the back panel off already and it has a huge sized 2800 mAh battery in it. Same size as the bulge at the back.
i wander why they used a such a huge size battery when most batteries are 1/2 the size for 2800 mAh.
I have not removed the circuit board as it has quite a few screws to undo and i thought i would ask you for your opinion first on replacing the green lcd backing.