View Single Post
Old 04-18-2012, 01:05 PM   #176
non_fox
Junior Member
non_fox began at the beginning.
 
Posts: 3
Karma: 10
Join Date: Apr 2012
Device: kindle touch
kindle touch, i need help with simple debricking

I can not kindle touch 5.1 update
Diags mode, in my opinion, I think it's a mistake.
So what should reboot. Then,my Kindle is the brick.
Recovery was. After that, reboot again, and my Kindle is the brick

win7 64bit only uses.
'mmcblk0p1-kt-5.0.0.img', 'mmcblk0p2-kt-5.0.0.img', 'mmcblk0p2_ssh-kt-5.0.1.img.gz'
I have downloaded three files. But

In this file
'mmcblk0p1-kt-5.0.0.img', 'mmcblk0p2-kt-5.0.0.img'
I will use two files. So, I'm ok?
'fastboot flash diags mmcblk0p2_ssh.img' and 'dd if = / mnt/us/mmcblk0p1.img of = / dev/mmcblk0p1 bs = 4'
When I enter the command
'Fastboot flash diags mmcblk0p2-kt-5.0.0.img'
'Dd if = / mnt/us/mmcblk0p1-kt-5.0.0.img of = / dev/mmcblk0p1 bs = 4'
I enter in this way. So, I'm ok?
Or
I command you to change the file name to match. So, I'm ok?
And
'/ Mnt/us/mmcblk0p2-kt-5.0.0.img' file location is ok?

I've used selectboot. And, fastboot mode was attempted, however, I have fastboot mode is working correctly, Is there a way to check?
I have entered a command to Fastboot. But that's not the command is not executed.
Do I need a separate connection Kindle??

PS ... Sentence using automatic translation tools are not smooth. Sorry
non_fox is offline   Reply With Quote