Originally Posted by geekmaster
USBnet for diags requires flashing the mmcblk0p2_ssh.img file you can download at the first post. Diags menu N) U) Z) X) to start SSH, wait 20 seconds, then SSH in (root password mario). Then you can flash mmcblk0p1 with dd. You CANNOT flash mmcblk0p1 with fastboot because it is too big...
If you damaged your diags kernel, you can boot diags with the kernel in the kexec thread (booting from USB drive), or you can flash that kernel to your mmc with fastboot.
You might also need to reset the boot counter (search the posts). Erasing mmcblk0p3 would also reset the counter, but you would lose your collections database if you do that.
I flashed right mmcblk0p2 twice, then flashed diags_kernel - no effect.
I'll try to erase mmcblk0p3, but I doubt there is anything..
I've just run dd if=/dev/zero of=/dev/mmcblk0p3 bs=4K with data.tar.gz you provided in "Select boot.." and RUNME.sh
Nothing changed. USBnetwork doesnt work.