Hi, SD card should be formatted FAT32, but I think you have that, as it's sometimes seen by the device.
What you have sems to be either a hardware problem, or -more likely- a firmware problem with not recognized drivers.
My suggestion would be to reflash the firmware from scratch, i.e. beginnig with
finally 2.1.1 (if you like)
the dealerupdate will clean the system completely, and 2.0.6 is necessary as a base for 2.1.0 / 1
All three versions can be found on PB support-page
Last edited by troll05; 07-19-2011 at 01:00 PM.