Usage: ./madplay [OPTIONS] FILE [...] Decode and play MPEG audio FILE(s). Verbosity: -v, --verbose show status while decoding -q, --quiet be quiet but show warnings -Q, --very-quiet be quiet and do not show warnings --display-time=MODE use default verbose time display MODE (remaining, current, overall) Decoding: --downsample reduce sample rate 2:1 -i, --ignore-crc ignore CRC errors --ancillary-output=PATH write ancillary data to PATH Audio output: -o, --output=[TYPE:]PATH write output to PATH with format TYPE (below) -b, --bit-depth=DEPTH request DEPTH bits per sample -R, --sample-rate=HERTZ request HERTZ samples per second -d, --no-dither do not dither output PCM samples --fade-in[=DURATION] fade-in songs over DURATION (default 0:05) -a, --attenuate=DECIBELS attenuate signal by DECIBELS (-) -a, --amplify=DECIBELS amplify signal by DECIBELS (+) -A, --adjust-volume=DECIBELS override per-file volume adjustments -G, --replay-gain[=PROFILE] enable Replay Gain volume adjustments using PROFILE (radio, audiophile) Channel selection: -1, --left output first (left) channel only -2, --right output second (right) channel only -m, --mono mix left and right channels for monaural output -S, --stereo force stereo output Playback: -s, --start=TIME skip to begin at TIME (HH:MM:SS.DDD) -t, --time=DURATION play only for DURATION (HH:MM:SS.DDD) -z, --shuffle randomize file list -r, --repeat[=MAX] play files MAX times, or indefinitely --tty-control enable keyboard controls --no-tty-control disable keyboard controls Miscellaneous: -T, --show-tags-only show ID3/encoder tags only (do not decode) -V, --version display version number and exit --license show copyright/license message and exit -h, --help display this help and exit Supported output formats: cdda CD audio, 16-bit big-endian 44100 Hz stereo PCM (*.cdr, *.cda) aiff Audio IFF, [16-bit] PCM (*.aif, *.aiff) wave Microsoft RIFF/WAVE, [16-bit] PCM (*.wav) snd Sun/NeXT audio, 8-bit ISDN mu-law (*.au, *.snd) raw binary [16-bit] host-endian linear PCM hex ASCII hexadecimal [24-bit] linear PCM null no output (decode only)