The GNU `macchanger' utility helps to view and manipulate the MAC
address of network interfaces.

Why a MAC Changer?
Changing iLiad's MAC address is easier than setting iLiad's hardware MAC on the white list of your friend's WLAN router.

Installation copies all needed files to iLiad's main memory -> usage in any shell script possible.
Changing MAC with iLiad's tagging tool is included. Maybe a bit itchy.
Rebooting iLiad sets the default MAC back.


GNU MAC Changer
Usage: macchanger [options] device

-h, --help Print this help
-V, --version Print version and exit
-s, --show Print the MAC address and exit
-e, --endding Don't change the vendor bytes
-a, --another Set random vendor MAC of the same kind
-A Set random vendor MAC of any kind
-r, --random Set fully random MAC
-l, --list[=keyword] Print known vendors
-m, --mac=XX:XX:XX:XX:XX:XX Set the MAC XX:XX:XX:XX:XX:XX


http://www.alobbs.com/macchanger/
http://directory.fsf.org/project/macchanger/

Thanks yokos for this application. What's the advantage compared to a simple
ifconfig wlan0 hw ether xx:xx:xx:xx:xx:xx
Is there any difference?

Thanks yokos for this application. What's the advantage compared to a simple
ifconfig wlan0 hw ether xx:xx:xx:xx:xx:xx
Is there any difference?
Yepp, I have known this command, but never used it even on my desktop.
gnu mac changer has got ifconfig's "Set specific MAC address of a network interface" plus these ones:
# Set the MAC randomly
# Set a MAC of another vendor
# Set another MAC of the same vendor
# Set a MAC of the same kind (eg: wireless card)
# Display a vendor MAC list (today, 6800 items) to choose from
[as explained in gnumacchanger --help]

Thanks, I will give it a try. Now we only need aircrack-ng and packet injection :D

How can I change the MAC of iliad's wired ethernet interface card? seems only wlan0 is available in ifconfig, which is the wireless card.
can anyone help me? :help:

The ethernet interface is eth0 which is available after the corresponding module (modprobe smc91x) has been loaded.

The ethernet interface is eth0 which is available after the corresponding module (modprobe smc91x) has been loaded.

ThX! I am new to the linux stuff but I got connected successfully after your hint.:thanks:(My static IP is binded with MAC so I have to change the MAC manually)

just for those linux rookies like me, this is what I did:

#modprobe smc91x
#ifconfig eth0 down
#ifconfig eth0 hw ether XXXXXXXXXX(MAC)
#lsmod
(if smc91x is not loaded then:
#modprobe smc91x

Nice that you figured it out. Do you need it for your cable provider?

Nice that you figured it out. Do you need it for your cable provider?

sorry but I don't quite understand..I am now an undergraduate and it is the school's regulation that every student's static IP is binded with his MAC in order to get access to the network.
I've been working on the iliad these two days and just learned how to setup swap file for the iliad...it is really an educational device : )
due to lack of knowledge about networking I haven't figured out how to use SSH to log on my iliad remotely in my dorm, so I have to endure the slow mrvxt response before that.:smack:

Ah ok, just wondering why you had to change your Mac. Nothing to worry about... Have fun with your device!

Thanks, I will give it a try. Now we only need aircrack-ng and packet injection :D

Now that would be fun. I'd look much less crazy than with a 2kg tablet PC (and way way less crazy than with a regular laptop :rofl: )

What about just running Kismet?