hi i had recently subscribed to a few RSS feeds and now about 10 of them are corrupt files.

i tried to delete them using the linux rm command but it says read-only file system.
i cant delete them using my windows-based PC too.

any help appreciated.

thanks

Maybe I'm missing an obvious fact, but what are these files ON ? A computer, a Kindle, a Sony, .... ?? From a Linux command line, you should be able to change the permission on the file, so it is NOT read-only.

chmod 755 file.name
rm file.name

hi i had recently subscribed to a few RSS feeds and now about 10 of them are corrupt files.

i tried to delete them using the linux rm command but it says read-only file system.
i cant delete them using my windows-based PC too.

any help appreciated.

thanks

I had this problem too. The answer is (straight from the people at iRex), to copy your uncorrupted files to the PC. Then use the disk formatting program of your choice to reformat the iLiad's internal drive in FAT32 format. Then copy your files back to the iLiad, and everything will be fine again.

In Linux I used the command:

mkfs -t vfat -v -I /dev/sdb

The device name maybe something other than /sdb on your system; check before you start, so you don't format the wrong drive!

Maybe I'm missing an obvious fact, but what are these files ON ? A computer, a Kindle, a Sony, .... ?? From a Linux command line, you should be able to change the permission on the file, so it is NOT read-only.

chmod 755 file.name
rm file.name

The secret is to look under ichor's name, where it says "Device: iLiad" :)

Welcome to the forum, Ichor.
I hope that Carandol's tip works for you. But if you have any other difficulties, do try posting on the Iliad section of the forum. You are more likely to get an expert response more quickly. (Though just over 12 hours isn't bad.)

im a newbie to linux.. how do i check which drive i need to format?

thanks

im a newbie to linux.. how do i check which drive i need to format?

I don't know which version of Linux you're using. I'm using Mepis, which is KDE-based, and when I click on the icon for the iLiad on the desktop, it opens a window, and the title bar of the window is "media:/sdb". Assuming your Linux does the same, the bit after the / is the bit you should put after /dev/ in the command. I'm not an expert on the command line either, so if you need a more technical explanation, you'll have to hope someone else answers! :)

If it says that the file system is mounted as read-only it may also not allow you to reformat the drive. If you find this to be the case, you may need to un-mount and remount (see the man pages for "mount" and "umount") in order to proceed.